Herunterladen Inhalt Inhalt Diese Seite drucken

Inserting The Battery - Olympus TG-810 Handbuch

Vorschau ausblenden Andere Handbücher für TG-810:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 20
● Thank you for purchasing an Olympus digital camera. Before you start to use your new camera, please read these instructions
carefully to enjoy optimum performance and a longer service life. Keep this manual in a safe place for future reference.
● We recommend that you take test shots to get accustomed to your camera before taking important photographs.
● In the interest of continually improving products, Olympus reserves the right to update or modify information contained in this manual.
● The screen and camera illustrations shown in this manual were produced during the development stages and may differ from the
actual product. Unless otherwise specifi ed, the explanation about these illustrations is provided for TG-810.
The camera you purchased is provided with the CD-ROM Instruction Manual. For detailed information on all features and
Provisions of warranty, please refer to the Instruction Manual. Adobe Reader is required to view the Instruction Manual.

Inserting the battery

1
Battery/card/connector cover
Battery/card/connector cover
3
3
2
2
Battery/card/
Battery/card/
connector cover lock
connector cover lock
2
Battery lock knob
Battery lock knob
Insert the battery with the B marks toward the battery lock
knob as shown above.
Damage to the battery exterior (scratches, etc.) may
produce heat or an explosion.
Insert the battery while sliding the battery lock knob in the
direction of the arrow.
2 EN
1
1
LOCK knob
LOCK knob
3
1
1
When removing the battery or card, be sure to turn off
the camera before opening or closing the battery/card/
connector cover.
When using the camera, fi rmly close the battery/card/
connector cover lock and LOCK knob.
Slide the battery lock knob in the direction of the arrow to
unlock, and then remove the battery.
Charging the battery and setting up
using the supplied CD
Connect the camera to the computer to charge the battery and
use the supplied CD for setup.
User registration using the supplied CD and installation of
ib computer software is available on Windows computers
only.
The camera battery can be charged while the camera is
connected to a computer.
Windows
We recommend that you use a computer equipped with
Windows XP (Service Pack 2 or later), Windows Vista, or
Windows 7.
1
Insert the supplied CD in a CD-ROM drive.
2
2
3
3

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Tg-805

Inhaltsverzeichnis