Accessories, To Be Ordered Separately - HBM C16M Serie Montageanleitung

C16M...
8

Accessories, to be ordered separately

Each for two weighing modules (see Dimensions):
1-ZAC16/MSL40T, for C16/MSL20 t...40 t, consists of:
1 piece threaded rod M20x1000*, galvanized
6 pieces hexagonal nut M20 DIN 934, galvanized
2 pieces washer DIN 9021, ∅21 mm, galvanized
1-ZAC16/MSLR40T, for C16/MSLR20 t...40 t, consists of:
1 piece threaded rod M20x1000*, stainless steel
6 pieces hexagonal nut M20 DIN 934, stainless steel
2 pieces washer DIN 9021, ∅21 mm, stainless steel
1-ZAC16/MSL60T, for C16/MSL60 t, consists of:
1 piece threaded rod M30x1000*,galvanized
6 pieces hexagonal nut M30 DIN 934, galvanized
2 pieces washer DIN 9021, ∅31 mm, galvanized
1-ZAC16/MSL100T, for C16/MSL100 t + 200 t, consists of:
4 pieces threaded rod M30x1000*, galvanized
12 pieces hexagonal nut M30 DIN 934, galvanized
4 pieces washer DIN 9021, ∅31 mm, galvanized
* The threaded rods have to be adapted to the corresponding installation conditions on the customer side.
Further accessory:
Fixed bearings with the same installation height as the weighing module are
e.g. very helpful as a dummy for installations. Please find further information
in a separate data sheet.
A1268-2.1 en/de/es
15
HBM