General Description Of The Unit - Mitsubishi Electric NX-W serie Betriebsanleitung

UM_NX-W_00_05_19_ML
The compressors and the refrigeration circuit contain lubricating oil, which must be recovered in accordance with the regulations in force. Do not release oil into the environment.
4

GENERAL DESCRIPTION OF THE UNIT

Unit for the production of chilled water with water source, hermetic rotary scroll compressors, brazed plate heat exchangers and electronic expansion valve. The range includes
versions with two single-circuit compressors and versions with four compressors divided into two circuits.
The unit is designed for indoor operation.
The intended use of this device is to cool or heat, by means of a vapour compression cycle, a fluid (water, brine, etc.) for air-conditioning applications in buildings, processes or
other. No use other than that described is foreseen. Use of the machine for purposes other than those described may result in risks to the safety and health of persons and
material damage to the unit.
4.1 Nomenclature
Example:
NX-W-Y/H 0302
4.2 Unit configurations
The following configurations are contemplated:
•
Chiller:
•
Reversible chiller (water side):
•
Reversible heat pump, gas side:
The units can be supplied as standard or with integrated hydronic kits.
Standard units
NX-W 0112-0802 - NX-W/H 0112-0802 - NX-WN 0112-0802
MITSUBISHI ELECTRIC HYDRONICS & IT COOLING SYSTEM S.p.A.
0122-0802
0604-1204
---
/H
---
-Y
-Z
NX-W
NX-WN
NX-W
NX-W/H
NX-WN
30
- 2 on/off compressors
- 4 on/off compressors
- Standard configuration
- Reversible hydraulic side
- Comfort
- Process
- IT Cooling
- Water-cooled chiller
- Reversible heat pump
Translation of the original instructions
EN