KEF KIT200 Bedienungsanleitung Seite 22

dvd system controls
STAND BY
Turns the system in and
out of stand by.
display
Surround sound encoding
currently being applied by
the system:
DOLBY DIGITAL
®
Output acoustic mode
over ride indicator:
dvd rear panel STEREO / MOVIE
DV D
region
(code)
video connection setup
Selecting the correct input on your TV
The KEF Instant Theatre on-screen displays will only be
present on your TV screen if the TV's external input is
properly set to the correct input which is connected to
the DVD player.The video input selection is most
commonly made on televisions by pressing the TV's
remote control button marked 'TV/Video', 'Input','AV in'
or 'Aux'.
Selecting Component and Progressive DVD output
When using the component video connection to your TV
(whether progressive or not) you must connect the
composite video connection as well to allow you to set the
component option while the default DVD output is
2 2
<> VOLUME
Increases or decreases the
system volume. Pressing also
unmutes the system if muted
SOURCE
Changes to the next
source selection with
Will display CD track number and its elapsed
time when a disc is playing or the frequency
Radio
KIT200DVD HOME ENTERTAINMENT SYSTEM
KEF AUDIO(UK), MAIDSTONE, ENGLAND
Connection Video output to TV Scart (Europe
only) Component, S-video or
PLAY/PAUSE
Starts the DVD or CD playing,
if a disc is in. If already playing
it will pause the disc; press
again to resume playing
<> SKIP/PRESET
Selects the next or previous chapter on a
DVD, track on a CD or MP3 disc, picture
on a JPEG disc or radio station preset
Video inputs S-video
Composite
composite only. Once you have selected the component
option in the DVDs video settings menu change the TVs
input source to compontent and then select progressive if
supported by your TV.
Video loop-through
The KEF Instant Theatre only plays composite video inputs
on the composite video output and only plays SVideo
inputs on the SVideo output.You will therefore need a
composite or an SVideo lead if you are using these as
video sources.
Record and Multi-room audio outputs
Stereo mode must be selected in the Audio menu when
When SLEEP is
activated, the
time until system
turn off is
Radio PRESET
number
Digital audio Audio inputs from
OPTICAL
AUDIO OUT
Digital
Audio
output
STANDBY
OPEN/CLOSE
Opens and closes
the disc tray