Intended Use; Indications For Use - Ottobock 17B206 Gebrauchsanweisung

Scope of delivery (see fig. 1)
Item Component
3 Deep groove ball bearing
4 Bearing washer
5 Upper joint section
Scope of delivery (see fig. 2)
Item Component
1 Screw
2 Lamination dummy 5° pre-flexed 317X206
3 Lamination dummy 7.5° pre-
flexed

3 Intended use

3.1 Indications for use

The 17B206 and 17B206=7.5 free-moving orthosis joints must be used
exclusively as a medial support in the E-MAG orthosis. Use the orthosis
joints up to a patient weight of max. 100 kg. Observe the 647G1165 instruc­
tions for use.
The orthosis joint is intended exclusively for orthotic fittings of the lower
limbs on one patient.
3.2 Indications
Partial or total paralysis of the leg muscles.
Indications must be determined by the physician.
4 Safety
4.1 Explanation of warning symbols
Warning regarding possible risks of accident or injury.
CAUTION
Warning regarding possible technical damage.
NOTICE
4.2 General safety instructions
CAUTION
Incorrect alignment, assembly or adjustment
Risk of injury due to change in or loss of functionality
► Assembly, adjustment and maintenance operations may only be com­
pleted by qualified personnel.
8
Reference number
Reference number
317X206=7.5