Log-In Methods By The Uniflow Integration - Canon imageRUNNER 1730i Bedienungsanleitung

Log-in Methods by the uniFLOW Integration

The uniFLOW integration provides the following log-in methods:
NOTE
• For instructions on how to log in to the machine as the System Manager, see
"Operating the Machine in System Management Mode," on p. EN-6.
• For instructions on how to log in to the machine with each log-in method, see "Logging
in to the Machine," on p. EN-8.
User Name and Password
On the machine's control panel, users enter their user name and password.
PIN Code
On the machine's control panel, users enter their PIN code.
ID Card
Users hold their ID card over the MiCard Reader attached to the machine.
IMPORTANT
The MiCard Reader is optional.
Department ID and Password
On the machine's control panel, users enter their department ID and password.
IMPORTANT
The log-in method using the department ID and password is available only when
"Authentication to the Machine" (p. EN-3) is applied as the authentication mode.
Managing the Machine with the uniFLOW Integration
EN-4