Lionelo LO-HUGO Bedienungsanleitung Seite 22

How to adjust headrest
NOTE: Do not use the safety seat if it has not been se-
cured in the car. Place the child in the safety seat once
you have finished assembly.
Thanks to a properly secured headrest, the seatbelt
EN
is properly positioned and your child is provided with
comfort and safety.
The headrest can be adjusted in eleven positions. The
headrest height must be adjusted in a way that two fin-
gers fit between child's arms and headrest (D).
To set the headrest height (E):
Grab the handle behind the headrest and pull up-
1.
wards gently.
Adjust a suitable headrest height. When you release
2.
the handle, the headrest will lock in position.
Place the safety seat in the car.
3.
Check the headrest for proper height when the child
4.
is in the safety seat. If the height is wrong, repeat
the procedure.
How to assemble safety seat
It is possible to use the seat for older children. To disas-
semble the backrest, put the backrest down and pull up-
wards to detach it from the seat (F).
Assembly with seatbelt
Fastening seatbelts
1.
Place the safety seat on the car seat. Make sure
•
the safety seat backrest fits tight to the seat
backrest (G).
Place the child in the safety seat.
•
Pull the seatbelt, carry in front of the child
•
and fasten it (H).
EN