Setting And Starting Aprogramme; Setting Mode - Electrolux GA60LV221 Benutzerinformation

70 www.electrolux.com
USING THE DETERGENT
A
Do not use more than the correct
quantity of detergent. Refer to the
instructions on the detergent pack-
aging.
Detergent tablets do not fully dis-
solve with short programmes and
detergent residues can stay on the
dishes.
We recommend that you use de-
tergent tablets with long pro-
grammes.
SETTING AND STARTING A
PROGRAMME

Setting mode

The appliance must be in setting mode to
accept some operations.
The appliance is in setting mode when, af-
ter the activation:
B
30
A
20
-
+
C
Engaging the holders and the support
1. Push the support to the front part of
the basket to engage it.
2. Engage the holders from the support.
CAUTION!
Use only detergents for dishwash-
ers.
1. Press the release button (B) to open
the lid (C).
2.
Put the detergent in the compartment
(A) .
3. If the programme has a prewash
phase, put a small quantity of deter-
gent on the inner part of the appliance
door.
4.
If you use detergent tablets, put the
tablet in the compartment (A).
5. Close the lid. Make sure that the re-
lease button locks into position.
• All the programme indicators come on.
If the control panel shows other conditions,
press and hold function buttons (B) and (C)
at the same time until the appliance is in
setting mode.
Starting a programme without
delay start
1. Open the water tap.
2. Press the on/off button to activate the
appliance.
3. Make sure that the appliance is in set-
ting mode.
4. Set the programme.
• The related programme indicator
comes on.
• The programme duration flashes in
the display.
5. Close the appliance door. The pro-
gramme starts.