Product Description And Specifications; Intended Use - Bosch GTM 12 JL Professional Originalbetriebsanleitung

38 | English
 Always use the parallel guide or the angle guide. This
improves the cutting accuracy and reduces the possibility
of saw blade binding.
 Products sold in GB only: Your product is fitted with a
BS 1363/A approved electric plug with internal fuse
(ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should
be cut off and an appropriate plug fitted in its place by an
authorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Products sold in AUS and NZ only: Use a residual current
device (RCD) with a rated residual current of 30 mA or
less.
Symbols
The following symbols can be important for the operation of
your power tool. Please memorise the symbols and their
meanings. The correct interpretation of the symbols helps
you operate the power tool better and more secure.
Symbol Meaning
 Laser Radiation
Do not stare into beam
Class 2 laser product
 Keep hands away from the cutting
area while the machine is running.
Danger of injury when coming in con-
tact with the saw blade.
 Wear a dust respirator.
 Wear safety goggles.
 Wear ear protectors. Exposure to
noise can cause hearing loss.
 Danger area! Keep hands, fingers or
arms away from this area.
1 609 92A 1T0 | (28.10.15)
Symbol Meaning
305mm
Ø max.
300mm
Ø min.
Observe the dimensions of the saw blade.
The hole diameter must match the tool
spindle without play. Do not use reducers
or adapters.
2 mm
51 mm
When changing the saw blade, pay atten-
tion that the kerf width is not less than
2,0 mm and the blade body thickness not
greater than 2,0 mm. Otherwise, there is
danger that the riving knife (2,0 mm) be-
comes wedged in the workpiece.
When operating the combination saw as a
table saw, the maximum workpiece height
is 51 mm.
Symbol on the lever 11 for tilting and lock-
ing the retracting blade guard
and
symbol on the tool arm release button 17
for releasing the tool arm.
Symbol for use of the combination saw as
a chop and mitre saw.
Symbol for use of the combination saw as
a table saw.
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.

Intended Use

The power tool is intended as a stationary machine for making
straight lengthways and crossways cuts in wood. Horizontal
mitre angles of –48° to +48° as well as vertical bevel angles
of –2° to +47° are possible.
The machine is designed with sufficient capacity for sawing
hard and softwood as well as press and particle board.
When operating as a table saw, the power tool is not permit-
ted for cutting aluminium or other non-ferrous metals or al-
loys.
The light of this power tool is intended to illuminate the power
tool's direct area of working operation and is not suitable for
household room illumination.
30mm
Ø
Bosch Power Tools