LEXIBOOK ChessMan Max Timer Bedienungsanleitung Seite 14

Setting L6.
This setting works in the same way as setting L3 but the display of the computer's move stops the timer to
allow the player the time to move the piece without being penalised.
9.3) Selecting levels and settings.
LEVEL
TIME/MOVE
1
2
3
4
5
6
7
8
LEVEL
TIME/MOVE
0
When you turn the chess computer on for the first time with the timer connected, the game automatically
starts on level 1 and in game setting L3. After that, it will save the level and setting when you turn it off
and when you press NEW GAME.
To change the level or setting, follow these instructions:
1. Press the LEVEL key on the computer to go to level selection. The computer will illuminate the light
corresponding to the current level (for example, square A6 corresponds to level 1, setting L3, square G6
corresponds to level 1, setting L6).
2. Consult the table above to find out the square corresponding to the level and setting you want. Press
this square.
3. Press the LEVEL key again to exit level selection. Then begin playing with your first move, or press
MOVE to let the computer go first.
If you want to check which level and setting is selected without changing them, follow this procedure:
1. Press the LEVEL key. The computer will show the current level by illuminating the lights of the square
corresponding to the level and the timer shows the game setting.
2. Press LEVEL a second time to return to the game.
You can change or verify the level at any moment of the game when it's your turn to move.
CG2400 •• A6
SETTING
RESPONSE
L3 L4
5 seconds A6 C6
10 seconds A7 C7
30 seconds A8 C8
1 minute B1 D1
3 minutes B2 D2
10 minutes B3 D3
30 minutes B4 D4
2 hours B5 D5
SETTING
RESPONSE
L1
MULTI
B8
MOVE
14
14
L5 L6
E6 G6
E7 G7
E8 G8
F1 H1
F2 H2
F3 H3
F4 H4
F5 H5
L2
D8
11/03/02, 17:30