Inhaltsverzeichnis
Werbung
2
SONY
POWER
Q·:©:·
2
ED IT: Structure
3
40
3
Edit Mode
Changing the Structure
{Connection Configuration)
With the following procedure you can
change the structure of the two main effect
blocks by selecting from among five
connection patterns. When making
selections, refer to the "Overall Signal
Flow" diagram (page 64) and the
indications in the main unit's display
window.
1
Perform steps 1 and 2 of the
"Setting the output level".
2
Press the FUNCTION B button.
3
Turn the operation dial or use the
shuttle ring to select the
structure.
Werbung
Inhaltsverzeichnis
