Sony HR-MPS Bedienungsanleitung Seite 34

34
Edit Mode
To change another parameter on
the same page of the same
effect
1 When finished changing the previous
parameter, select the next parameter to
change by pressing the corresponding
FUNCTION button (A-F).
2 Use the operation dial or shuttle ring to
change the parameter setting.
To change another parameter on
another page of the same effect
1 When finished changing the previous
parameter, press the EDIT/PAGE button
to open another page.
2 Select the next parameter to change by
pressing the corresponding FUNCTION
button (A-F).
3 Use the operation dial or shuttle ring to
change the parameter setting.
To change the parameter of a
different effect
1
When finished changing the previous
parameter, press the EXIT button to
return to the "EDIT: Select" screen.
2 Select the next effect by pressing the
corresponding the FUNCTION button (B,
C,E,F).
3
If
necessary, press the EDIT/PAGE
button to open another page.
4 Select the parameter to be changed by
pressing the corresponding FUNCTION
button (A-F).
5 Use the operation dial or shuttle ring to
change the parameter setting.
To return to the "PLAY" screen
after changing parameters
When finished changing parameters, press
the EXIT button twice.
The display returns to the "PLAY" screen,
where you can use the operation dial or
shuttle ring to select another effect from
memory.
Changes made to parameter settings are
temporary, and are replaced by the original
settings as soon as you select another
memory effect. To save your parameter
setting changes, use the "Save" function
(see page 46).
To quit making changes and
return to the original memory
settings
To return to the original parameter settings
after making changes which have not yet
been saved, press the EXIT button until the
unit returns to play mode ("PLAY" screen),
then select another effect from memory.
The next time you return to the previous
effect, the settings will be set to their
original values.
·./