Intended Use; Package Contents; Electrical Safety - DeWalt DCF825 Übersetzt Von Den Originalanweisungen

EN GLI SH
Do not probe with conductive objects.
Do not charge damaged battery packs.
Use only with D WALT battery packs.
E
Others may burst causing personal injury
and damage.
Do not expose to water.
Have defective cords replaced
immediately.
Charge only between 4 °C and 40 °C.
Discard the battery pack with due care for
the environment.
Do not incinerate the battery pack.
Charges Li-Ion battery packs.
See Technical Data for charging time.
Only for indoor use.

Package Contents

The package contains:
1 Impact driver
1 Charger
2 Li-Ion battery packs (M2, L2, C2 models)
3 Li-Ion battery packs (M3, L3, C3 models)
1 Li-Ion battery pack (M1, L1, C1 models)
1 Magnetic bit holder
1 Belt hook
1 Kitbox
1 Instruction manual
1 Exploded drawing
NOTE: Battery packs, chargers and kitboxes are not
included with N-models.
• Check for damage to the tool, parts or
accessories which may have occurred during
transport.
• Take the time to thoroughly read and
understand this manual prior to operation.
34
Description (fi g. 1, 2)
WARNING: Never modify the power
tool or any part of it. Damage or
personal injury could result.
a. Trigger switch
b. Forward/reverse control button
c. Accessory release button
d. 6.35 mm (1/4") hex chuck
e. Battery release button
f. Battery pack
g. Worklights
h. Belt hook
i. Screw
j. Speed selector
k. Main handle
l. Magnetic bit holder

INTENDED USE

These impact wrench/drivers are designed for
professional impact screwdriving applications. The
impact function makes this tool particularly useful for
driving fasteners in wood, metal and concrete.
DO NOT use under wet conditions or in presence of
flammable liquids or gases.
These impact wrench/drivers are professional power
tools.
DO NOT let children come into contact with the
tool. Supervision is required when inexperienced
operators use this tool.
• This product is not intended for use by persons
(including children) suffering from diminished
physical, sensory or mental abilities, or for lack
of experience and/or for want of knowledge or
skills unless they are supervised by a person
responsible for their safety. Children should
never be left alone to play with this product.

Electrical Safety

The electric motor has been designed for one
voltage only. Always check that the battery pack
voltage corresponds to the voltage on the rating
plate. Also make sure that the voltage of your
charger corresponds to that of your mains.
Your D WALT charger is double insulated
E
in accordance with EN 60335; therefore
no earth wire is required.
If the supply cord is damaged, it must be replaced
by a specially prepared cord available through the
D WALT service organisation.
E