Remote Control Employment; Radio-Control Employment - CMO HPB Gebrauchs- Und Wartungsanleitung

•
To come back the employment to rest, bring the pressure to zero, pressing the pedal in the
zone indicated by the letter B. The oil will come back in the tank emptying the hydro-
pneumatic circuit.
8.3 EMPLOYMENT OF REMOTE CONTROL.
•
Pressing the button indicated with the letter A the pump begin to work.
•
Releasing the button A to keep pression.
•
Pressing button indicated with letter B the circuit is brought in unloading.
•
Leaving the operated button the employment of destination stops.
8.4 EMPLOYMENT OF RADIO- CONTROL.
Radio control consists in a pocket push-button panel fed with batteries for transistor a 9 Volt,
suitable to operate up to 4 hydro-pneumatic pumps.
•
In case of more pumps preventively verify the correspondence of letter wrote on the pocket
push button panel with that indicated on the Carter of the pump (Es: ABC/DEF/GHI or
LMN).
•
To let the pump work press the button A/D/G or L on the left column of the radio-control
corresponding to the letter indicated on the same pump.
•
To unload the hydro-pneumatic circuit and have the pump in rest position press the button
C/F/I or N on the right column of the radio-control corresponding to the letter indicated on
the same pump.
15