Modster Arrows Hobby F8F Handbuch Seite 14

Model assembly
Auxiliary fuel tank installation
1.Slide the auxiliary fuel tank into the rail as shown.
Machine gun installation
1.Carefully apply foam safe CA to the base of machine gun
and place the machine gun into the pocket as shown.
2.Carefully apply foam safe CA to the foam block and place
the foam block into the cut-out.
Propeller and spinner installation
1. Assemble the propeller and spinner as shown below.
Note:The motor should rotate clockwise when viewing
the plane from the rear.
05
Required Adhesives:
Medium CA
b
a
c
e
d