CO/Tech FT-0205 Bedienungsanleitung Seite 27

Setting the alarm (Alarm)
Set the alarm limits and activate/deactivate the alarm. Make any desired changes and
click [ Save ] to save or [ Cance ]l to exit without saving.
In the pictured example, the indoor unit will sound an alarm if the outdoor temperature
exceeds 30 °C, the average wind speed exceeds 5 m/s and if the rainfall during one
day exceeds 50 mm.
Highest and lowest measured readings (Max/Min)
The highest values are coloured red and the lowest blue.
• Press [ Reset ] to clear all the data.
• Press [ Exit ] to close the window.
Note: Clearing the saved max/min readings sets the readings
of all the sensors to zero.
27