CO/Tech FT-0205 Bedienungsanleitung Seite 16

Changing the display mode for the time/date and weather data.
1. In normal display mode, press [ MODE/SET ] repeatedly to select between
time/date, rainfall, atmospheric pressure and histogram.
2. Press [ CHANNEL/+ ] or [ HISTORY/- ] to change the display mode.
3. You can return to normal display mode at any time by pressing [ SNOOZE/LIGHT ].
Time , Date
• Time
• Time & week day
• Date
- "TIME" Select between displaying time, time and day or date.
- "RAIN" Select whether to display the rainfall per hour, week, month or
total rainfall.
- "PRESSURE" Select between display of relative or absolute atmospheric
pressure. REL or ABS will appear on the display respectively.
- "HISTORY" Select either 24- o 72-hour clock display.
Information about the atmospheric pressure
The weather station can display the atmospheric pressure in different ways,
ABS absolute (actual pressure at current altitude) and REL relative (what the pressure
would be at sea level).
• The relative value is used by meteorologists to be able to compare
the atmospheric pressure at different locations.
• The normal atmospheric pressure at sea level varies depending on
the geographical location but is usually approximately 1013.2 hPa.
A pressure of under 990 hPa is regarded as low pressure and over
1020 hPa is regarded as high pressure.
• Since atmospheric pressure decreases with altitude, values for relative
atmospheric pressures are generally higher than their absolute counterparts.
Sound settings for buttons and alarms
In normal mode, hold in [ HISTORY/- ] for 3 seconds to switch the sound on/off.
BUZZON (On) or BUZZOFF (Off) will appear on the display respectively.
When the sound is switched off, no noise will be heard when buttons are pressed
and any alarms emitted by the weather station will be silent (only the alarm symbols
will flash).
Rain
• 1h
• 24h
• Week
• Month
• Total
16
Pressure
• Relative (REL)
• Absolute (ABS)
History
• 24h
• 72h