CO/Tech FT-0205 Bedienungsanleitung Seite 23

If you experience range problems, try the following:
• Turn off any other existing wireless equipment to check whether this is
the cause of the problem.
• Reduce the distance between the units.
• Reduce the number of obstacles (walls, furniture, etc) between the units.
Indoor unit
• The indoor unit has built-in temperature, humidity and atmospheric pressure
sensors. The unit should therefore not be positioned where it might be affected by
heat from heaters, cookers, fireplaces or other sources of heat.
• Avoid placing the unit next to metal objects such as metal window frames as this
may cause interference with reception.
• The indoor unit can be used with the table stand (21) or hung on a wall using
the hanging hole (17).
Outdoor unit
When you install the outdoor unit make sure that it is horizontal by using the built-in
spirit level (27).
1. Orientate the marking on
the weather vane. Make sure that
the "S" mark is facing south.
2. Choose whether you are going to mount the sensor with the bracket horizontal,
vertical or on a mast pole.
23