Software (Weatherhome); System Requirements; Installation; Instructions For Use - CO/Tech FT-0205 Bedienungsanleitung

Software (WeatherHome)

With the software Weather Home you can use a computer to view measurement data
in real-time, set the indoor unit, set alarms and clear the max/min readings.

System requirements

Computer
Operating system Windows NT4 (Service Pack >= 6a), Windows 2000,
Processor
Memory

Installation

1. Connect the included USB cable to a vacant
USB port on your computer and to the USB
connection (18) on the indoor unit.
2. Make sure that you have administrator rights for
the operating system.
3. Insert the supplied CD into your computer
CD drive. If the installation does not start
automatically: open the File Explorer file manager,
localise the CD and run "WeatherHome.exe".
4. Follow the instructions in the installation program and install Weather Home.

Instructions for use

Open the program called Weather Home.
• The main page shows current
readings and histograms.
• Display or hide graphs by clicking
on the names above the graphs.
PC with CD reader and available USB port
Windows XP, Windows Vista, Windows 7–10
Pentium III 500 MHz or higher
Minimum 128 MB, recommended 256 MB
25