Settings/Adjustments - CO/Tech FT-0205 Bedienungsanleitung

Settings/adjustments

Set the time, date, units of measurement, limits and display lighting.
1. In normal mode, hold in [ MODE/SET ] for 3 seconds to enter the settings mode.
2. Press or hold in [ CHANNEL/+ ] or [ HISTORY/- ] to change the value.
Confirm each stage with [ MODE/ SET ].
3. You can return to normal display mode at any time by pressing [ SNOOZE/LIGHT ] (12).
FMT
• 12H
• 24H
Threshold
• WEATHER
• STORM
• FMT: Select either 12- or 24-hour time display (24-hour is default).
• TIME: Set the hours and minutes.
•
DATE:
- Set the order of how the day, month and year are displayed: DDMMyy or MMDDyy
- Month setting
- Day setting
- Year setting
• CLR:
- Select ON if you want the max/min readings to be set to zero every night (at
midnight). "CLEARS 24" is shown in the display.
- Select OFF if you wish to delete the saved readings manually. Refer to
the Clearing readings section.
• UNIT SET:
- Temperature: Set the unit of measurement in which the temperature
- Wind speed:
- Rain:
- Pressure:
TIME DATE
• Hour • DDMMyy
• Minute • MMDDyy
• Month
• Day
• Year
Forecast
• Sunny
• Partly cloudy
• Cloudy
• Rainy
is to be displayed: °C or °F
Set the unit of measurement in which the wind speed
is to be displayed: m/s, km/h, knots, mph or btf (Beaufort scale)
Set the unit of measurement in which the rainfall
is to be displayed (mm or inches)
Set which unit of measurement the atmospheric pressure
is displayed in (hPa, inHg or mmHg)
CLR
• ON
• OFF
REC
• 16s, 32s, 48s
• 1 – 240 min
14
UNIT SET
• Temperature
• Wind speed
• Rain
• Pressure
Backlight Color
• LED
• IN
• OUT
• USE
• LOWER
• UPPER
• BRIGHT