CO/Tech FT-0205 Bedienungsanleitung Seite 20

Setting the alarm
1. In normal display mode, hold in [ MAX/MIN/ALARM ] for 3 seconds.
"HI" will appear on the display.
2. Hold in [ MODE/SET ] for 3 seconds to enter the alarm set mode.
3. Press or hold in [ CHANNEL/+ ] or [ HISTORY/- ] to change the value.
4. Activate or deactivate the alarm by pressing [ MIN/MAX/ALARM ]. Select ON
or OFF. The symbol comes on to indicate that the alarm is activated.
5. Confirm each step with [ MODE/ SET ].
6. You can now return to normal display mode by pressing [ SNOOZE/LIGHT ] twice.
Alarm Clock
• Hour
• Minute
Outdoor
• Temp
• high
• low
• Humidity
• high
• low
• Feels like
• high
• low
• Dew point
• high
• low
• Alarm Clock: Set the alarm clock (hours, minutes).
• Rainfall: Set the alarm limits for rainfall (1 hour "1h", 24 hours "24h")
• Wind: Set the alarm limit for the wind speed "GUST" and the average wind speed
"AVERAGE"
• Outdoor: Set the upper "HI" and lower "LOW" alarm limits for the outdoor
thermometer/hygrometer.
- Temperature: Set the alarm limits for the outdoor temperature
- Humidity:
- Feels like:
- Dew point:
• Pressure: Set the upper and lower alarm limits for the atmospheric pressure.
- Absolute:
- Relative:
• Indoor: Set the upper and lower alarm limits for the indoor temperature and
humidity
- Absolute:
- Relative:
Rainfall
• 1h, high
• 24h, high
Pressure
• Absolute
• high
• low
• Rela�ve
• high
• low
Set the alarm limits for the humidity
Set the alarm limits for the perceived temperature
Set the alarm limit for the dew point
Set the alarm limits for absolute pressure
Set the alarm limits for relative pressure
Set the alarm limits for absolute pressure
Set the alarm limits for relative pressure
Wind
• Gust, high
• Speed, high
Indoor
• Temp,
• high
• low
• Humidity
• high
• low
20