Max/Min; Clearing Recorded Readings; Histogram, Weather Forecast And Moon Phase - CO/Tech FT-0205 Bedienungsanleitung

Max/min

1. In normal display mode, press once on [ MAX/MIN/ALARM ]. MAX will appear
on the display and the maximum recorded readings of the rainfall, wind speed,
atmospheric pressure, temperature and humidity will be shown.
2. Press [ MAX/MIN/ALARM ] once more. MIN will appear on the display and
the minimum recorded readings of the rainfall, wind speed, atmospheric pressure,
temperature and humidity will be shown.
Pressing [ HISTORY/- ] while in max/min display mode will toggle between displaying
the readings for the rainfall and the atmospheric pressure.

Clearing recorded readings

Note:
Clearing the saved max/min readings sets the readings of all the sensors to zero.
1. In normal mode, press [ MAX/MIN/ALARM ] repeatedly to select MAX or MIN.
2. Hold in [ MODE/SET ] for 3 seconds (CLR will flash) to clear the max and min
readings respectively.
For automatic clearing of max/min readings every night at midnight, refer to
the Settings/adjustments (CLR) section.
Rainfall
1. In normal display mode, press [ MODE/SET ] twice to select the display mode for rainfall.
2. Press repeatedly on [ CHANNEL/+ ] or [ HISTORY/- ] to select the display mode.
3. Hold in [ MODE/SET ] for 3 seconds to clear the selected reading.
Memory
To clear the memory of the weather station, refer to the Software (WeatherHome) section.

Histogram, weather forecast and moon phase

Histogram
The weather station can display data recorded
24 or 72 hours back in time. Refer to
the Changing the display mode for the time/
date and weather data section.
The vertical axis of the graph shows the changes
in the measured data over time compared
with the current reading. The current reading
(the column furthest to the right) always
displays 0.
E.g. when looking at a temperature histogram:
If the column shows 0.4 it represents a
historical temperature 0.4 degrees higher
than the current temperature.
17