Scanning For The Outdoor Unit Sensors And Checking Their Operation - CO/Tech FT-0205 Bedienungsanleitung

Battery operation
1. Press in the catch and remove the battery cover.
2. Insert 3 × AAA/LR03 batteries. Note the polarity markings in
the battery compartment to ensure correct insertion.
3. Refit the battery cover.
Mains operation
• Connect the mains adapter to the DC 6.0 V
input socket and to a 230 V mains electricity
socket. AC ON will be appear on the display
screen for 3 seconds.
• If the mains adapter is disconnected and
the weather station goes over to battery
operation, AC OFF will appear on the display
screen.
- Remember to unplug the mains adapter
from the wall socket during heavy thunder
storms to protect the weather station.
Scanning for the outdoor unit sensors and
checking their operation
As soon as the indoor unit is switched on, it will begin to scan automatically for any
sensors in the vicinity. The scan will be indicated by the
When the symbol is no longer illuminated, the operation of the sensor can be tested.
Information
If during the scan the indoor unit can't find, or loses contact with the outdoor unit "--.-"
will appear on the display. Try scanning for the sensors manually:
In normal display mode, hold in [ CHANNEL/+ ] for 3 seconds. " " will appear on
the display.
lighting up.
10