Troubleshooting - eta MAGIC X-TREME Bedienungsanleitung

folds and wash out the dust stuck in between the folds). Turn the HEPA filter by 180° and
allow water to flow over the folds in the opposite direction. Keep turning and washing the
HEPA until it is clean. Allow it to dry out properly. After the maintenance, put the HEPA filter
and the separator back in the dust container B.
– The maximum suction effect will be reached with a clean filter and an empty container.
– Do not use any aggressive washing or cleaning agents or hot water to clean the filter.
– The filter is not intended for washing in a dishwasher.
– Cleaning the filter will not restore its original colour, but it will restore its filtration properties.
– In order to maintain the filtering parameters of the HEPA filter, we recommend that
you use a dry method of cleaning.
– If you clean the HEPA filter with water, its filtration properties will deteriorate. The filter
cannot be washed more than three times. After that, a new filter needs to be purchased.
– Neglecting filter cleaning may lead to breakdown of the vacuum cleaner!
– Make sure that the contact surfaces and sealing elements are functional.
– We recommend replacing the filter once a year or when it cannot be cleaned properly
or if it is damaged. You can buy a replacement st filter in the elektro shop chain.
Dust container
Rinse the dust container in running water and let it thoroughly dry.
The dust containers (B, D) is not resistant to cleaning in a dishwasher.
VI. TROUBLESHOOTING
Problem
Motor won't start
Vacuum cleaner is not
charging
The vacuum cleaner is
overheating
Empty the dust
containers and properly
clean the filtration
system
The suction
performance is not
sufficient
CAUTION
CAUTION
Cause
The battery is discharged.
The " " button is not in the
0 position
No power in the electrical
socket
Charging adapter or its cord
is damaged
Filtration system is soiled
Filtration system is soiled
Regulation in the position I.
Dust containers full
Clogged filter
The accessories are blocked Remove the blocking objects
The battery is discharged.
31 / 61
Solution
Recharge the battery
Press the " " button
Check if the circuit breakers
are on
Contact the authorised service
centre
Empty the dust containers and
properly clean the filtration system
Empty the dust container and
properly clean the filtration system
or replace the HEPA filter
Set the regulation to III.
Empty the containers
Clean or replace the filter
Recharge the battery
GB
!
!