Troubleshooting; Cleaning And Maintenance - Concept CW 1000 Bedienungsanleitung

EN

TROUBLESHOOTING

Questions
It does not spray
Water is leaking
from the tank
It does not suck

CLEANING AND MAINTENANCE

• Do not immerse the main body in water.
• Always unplug the window vac from the charger before cleaning or maintenance.
• Wash the microfibre cloth in warm soapy water and l et it dry properly .
• To clean the exterior of the window vac, wipe it with a soft damp cloth and then l et it dry properly .
• Clean the squeegee vacuum head and spray head in warm soapy water and l et it dry.
36
Fill the water tank with water.
Spray nozzle is blocked. Fill the tank with warm water and gently pull
the trigger to unblock the nozzle. If this fails, contact the customer service.
The water tank is overfilled or the dirty water tank is full. Check the rubber
sealing of the filter unit, if it is damaged, contact the dealer to provide a new
one.
The vacuum is not charged sufficiently.
Answers
C W 1000