Temperature Indicators; Temperature Regulation; Turbo Coolmatic Function - AEG SANTO Z 9 18 40-5i Benutzerhandbuch

28
Control panel
• The temperature indicator is switched over from the indicator of the ACTUAL tempera-
ture (Temperature indicator is illuminated) to the indicator of the DESIRED temperature
(Temperature indicator flashes) by pressing one of the Temperature setting buttons.
• Each time one of the two buttons is pressed again the DESIRED temperature is adjusted
by 1°C. The DESIRED temperature must be reached within 24 hours.
If neither button is pressed, the temperature indicator automatically switches back after a
short period (approx. 5 sec.) to the indicator of the ACTUAL temperature.
DESIRED temperature means:
The temperature that has been selected for inside the fridge. The DESIRED temperature is
indicated by flashing numbers.
ACTUAL temperature means:
The temperature indicator shows the current temperature inside the fridge. The ACTUAL
temperature is indicated with illuminated numbers.

Temperature indicators

The temperature indicators show several information:
• During normal operation, the temperature currently set for fridge and freezer are dis-
played.
• When the temperature is being adjusted a flashing display indicates the fridge tempera-
ture currently set .

Temperature regulation

To operate the appliance, proceed as follows:
1. Set the required temperature by pressing the corresponding temperature regulator. The
temperature indicator will immediately show the changed setting and the temperature
indicator flashes.
2. Each time the temperature regulator is pressed the temperature is adjusted by 1 °C. The
set temperature will be reached within 24 hours.
3. The temperature indicator will change from flashing to continuous illumination.
For a correct storage of the food the following temperatures should be set:
• +5 °C in the fridge
• -18 °C in the freezer.
When the setting is changed, the compressor does not start immediately if automatic de-
frosting is currently taking place. As the storage temperature within the fridge is reached
quickly you can store food immediately after switching on.

TURBO COOLMATIC function

The TURBO COOLMATIC function is suited for quick cooling of large quantities of goods in
the refrigerator.
To activate the function, do these steps:
1. Press the TURBO COOLMATIC button.
2. The TURBO COOLMATIC indicator switches on.
The TURBO COOLMATIC function now provides for intensive cooling. A DESIRED tempera-
ture of +3°C is automatically selected.
The TURBO COOLMATIC function is ended automatically after a period of 6 hours.
You can deactivate the function at any time:
1. Press the TURBO COOLMATIC button.