Avoid Damage To Property - Miomare HG00518 Montage-Und Sicherheitshinweise

CAUTION! RISK OF SCALDING! Adjusting
the hand shower
1
temperature of the water coming out. Check
the water temperature before stepping into the
shower.

Avoid damage to property!

Assembly should only be carried out by an
J
experienced person!
J Before wall mounting, check that the wall can
take the weight of the shower rod set. If in doubt,
ask in a specialist shop.
CAUTION! WATER DAMAGE! Before
J
drilling, ensure that there are no water pipes
where you intend to drill.
Ensure that all gaskets
J
Please note that gaskets
J
therefore will require to be replaced from time
to time.
Examine the wall before installation and choose
J
suitable installation fixings. We have supplied
fixings suitable for an ordinary solid masonry wall.
Tip: The hand shower
waterstop function: Slightly dripping
water will remind you to turn off the
shower.
Mounting
Q
Tip: For fittings with 26.4 mm (G
connection, use an adaptor with
⁄
26.4 mm (G 3 ") inner thread and
4
⁄
1
21 mm (G ") outer thread, available in DIY
2
store or bathroom shops.
Tip: A water-saving insert
shower rod set.
6 GB/IE/NI
may change the
are correctly seated.
2
are wear parts and
2
has a
1
⁄
3 ")
4
is included in your
4
Operation
Q
How to adjust the hand shower
Q
j Adjust the height of the hand shower holder
by using the adjustment knob
j Adjust the angle at which the hand shower
is tilted by using the hand shower holder
Shower functions
Q
j Turn the hand shower lever
shower function you wish to have (see Fig. E).
1
The hand shower
1
functions:
10
.
16
1
.
10
to set the hand
15
has the following
Massage
Rain + Massage
Rain
Mixed jet