McQuay CE 10C Installationshandbuch Seite 12

CE 30CR
A
4WV
Terminal
OF
Strip
Indoor
COMP
Unit
L
N
Indoor unit
Outdoor unit
Voltage range (2)
Power Supply Cable size
Number of conductors (1)
Interconnection Cable size
Number of conductors (1)
Recommended fuse (1)
CE 30CR
A
4WV
Terminal
OF
Strip
COMP
Indoor
Unit
L
N
Indoor unit
Outdoor unit
Voltage range (2)
Power Supply Cable size
Number of conductors (1)
Interconnection Cable size
Number of conductors (1)
Recommended fuse (1)
IMPORTANT: (1) These values are for information only, they should be checked and selected to comply with the local and/
or national codes and regulations. They are also subjected to the type of installation and size of conductors
used.
(2) The appropriate voltage range should be checked with label data on the unit. ETL listed unit is only
applicable to 60Hz power supply only.
Outdoor Coil Sensor
Interconnection Cable
Power Supply
Cable
2
mm
mm 2
A
Outdoor Coil Sensor
Interconnection Cable
Power Supply
Cable
380V – 415V/3Ph/50Hz + N + ! or 208V – 230V/3Ph/60Hz + N + !
mm 2 (50/60Hz)
2
mm (50/60Hz)
A (50/60Hz)
A
4WV
OF
COMP
Terminal Strip
L
Outdoor Unit
N
The electrical power must be provided with
L
!
protection devices (circuit breaker or fuse)
N
with double pole separation system (phase +
neutral) with minimum contact gap of 3mm.
220V – 240V/1Ph/50Hz + ! or 208V – 230V/1Ph/60Hz + !
A
4WV
OF
Terminal Strip
COMP
Outdoor Unit
L
N
The electrical power must be provided with
! protection devices (circuit breaker or fuse)
with double pole separation system (phase +
neutral) with minimum contact gap of 3mm.
CE 40CR
SL 40CR
1.5/2.5
5
1.5/1.5
7
10/20
1-8
CE 30CR
SL 30CR
4.0
3
4.0
7
25
CE 50CR CE 61/62CR
SL 50CR SL 60CR/61CR
2.5/4.0 2.5/4.0
5
1.5/1.5 1.5/1.5
7
16/25 16/25
5
7