McQuay CE 10C Installationshandbuch Seite 11

CE 30C
COMP
Terminal Strip
Indoor
Unit
The electrical power must be provided with
! protection devices (circuit breaker or fuse) with
double pole separation system (phase + neutral)
with minimum contact gap of 3mm.
Electrical Wiring Connection For CE Series 40 ~ 62C
Indoor Unit
Outdoor Unit
Voltage range (2)
Recommended fuse (1)
Power Supply Cable size
Number of conductors (1)
Interconnection Cable size
Number of conductors (1)
CE 40C/50C/61C
COMP
Terminal Strip
L
Indoor
Unit
N
Electrical Wiring Connection For CE 10/15/20/25CR (Heat Pump)
Indoor Unit
Outdoor Unit
Voltage range (2)
Power Supply Cable size
Number of conductors (1)
Interconnection Cable size mm
Number of conductors (1)
Recommended fuse
IMPORTANT: (1) These values are for information only, they should be checked and selected to comply with the local and/
or national codes and regulations. They are also subjected to the type of installation and size of conductors
used.
(2) The appropriate voltage range should be checked with label data on the unit. ETL listed unit is only
applicable to 60Hz power supply only.
Interconnection Cable
L
N
A (50/60Hz)
mm 2 (50/60Hz)
2
mm (50/60Hz)
Interconnection Cable
Power Supply
Cable
CE 10CR
SL 10BR
220V – 240V/1Ph/50Hz + ! or 208V – 230V/1Ph/60Hz + !
2
mm 1.5
3
2 1.5
5
A 10
Power Supply
Cable
CE 40C
SL 40C
380V – 420V/3Ph/50Hz+N + ! or 208V-230V/3Ph/60Hz+N+!
10/20
1.5/2.5
5
1.5/1.5
4
COMP
L
N
Terminal Strip
Outdoor
Unit
R
S
T
The electrical power must be provided with
!
N
protection devices (circuit breaker or fuse)
with double pole separation system (phase +
neutral) with minimum contact gap of 3mm.
CE 15CR
SL 15BR
1.5
3
1.5
5
10
1-7
COMP
L
Terminal Strip
N
Outdoor
Unit
L
N
CE 50C CE 61C/CE 62C
SL 50C SL 60C/SL 61C
16/25 16/25
2.5/4.0 2.5/4.0
5 5
1.5/1.5 1.5/1.5
4 4
CE 20CR CE 25CR
SL 20BR SL 25BR
2.5 2.5
3 3
2.5 2.5
5 5
16 20