Linear Triple Calendar; Gmt - Ball RR1401 Bedienungsanleitung

6.9 Linear Triple Calendar

CALIBERS: RR1403, RR1405
The triple calendar function may be also known as the "Month, Day, Date"
feature. The Trainmaster Racer and Trainmaster Doctor's Chronograph
introduce a BALL in-house development, the Linear Triple Calendar
function. This feature shows the month, the day and the date in a row at the
3 o'clock position for ease of use.
To set the functions, unscrew the crown and pull it out to position [1].
• Date setting: Turn the crown clockwise until the correct date is reached.
• Day setting: Turn the crown counterclockwise until the correct day is
reached.
• Month setting: The month function is set in the same manner as the date.
By rotating the date through all 31 days, the month wheel will move forward
to the next month.
In order to prevent damages to the date-switching mechanism, we advise
not to manually reset the Linear Triple Calendar between 8PM and 2AM.
36

6.10 GMT

CALIBERS: RR1201, RR1202
See above instructions for
"Automatic Watch" with the
following changes.
• Date Setting: Unscrew the crown and pull it out to position [1]. Turn
the crown counterclockwise to set the date. In order to prevent damage
to the date-switching mechanism, we advise not to manually reset the
date between 8PM and 2AM. Ensure that the date change takes place at
midnight and not at noon.
• Set the local time: In position [2], turn the crown forwards or backwards.
• Set the time of the second time zone: Turn the crown clockwise until the
correct time zone appears on the dial. Turn the GMT hand in one-hour
increments to prevent wear on the movement.
37