Maintenance And Cleaning; General Cleaning And Servicing; Replacement Parts - Parkside PLH 2800 B2 Originalbetriebsanleitung

shredder on and off").
3. Turn the adjustor screw (5) slowly
clockwise until you you hear
scraping noises. Small aluminum
shavings will come out.
4. Switch OFF the machine and
unplug the power supply.
Avoid unnecessary wear on
the pressure plate by not over-
adjusting.
Maintenance and
cleaning
Leave all work not described
in this manual to an authorised
customer service centre. Only
use original parts.
Wear hand protection when
working on the cylinder blade
(24).
Switch the shredder off,
unplug it form the mains, and
wait for the cylinder blade (24)
to come to a complete stop
before working on it.
Danger - Rotating blades.
Keep hands and feet out of
openings while machine is
running

General cleaning and servicing

Do not spray water onto
the shredder. Electric shock
hazard.
• Always keep the shredder, wheels and
air vents clean. Use a brush or cloth to
clean it, avoid cleaners and solvents.
• Always check that the shredder and
especially the guards are not worn
down or damaged but firmly attached
before use. Check that the nuts, bolts
and screws are tight.
• Check the covers and guards for
damage and improper attachment. If
necessary, change the components
• Keep the shredder in a dry place out
of children's reach. Do not cover the
shredder in nylon bags, as moisture
may develop.

Replacement parts

Replacement parts can be ordered directly
from our service centre. In your order,
quote the equipment type and position
number in the exploded view. Please contact
us for the exploded view.
GB IE NI
17