Pusher; Emptying The Collector Box; Overload Protection; Restart Prevention - Parkside PLH 2800 B2 Originalbetriebsanleitung

GB IE NI
press the "ON" switch (10) to
start shredding material. To switch
off, press the "OFF" switch (11).
Always move the function switch
(8) back into the middle neutral
position.
4. To start returning material, press
the function switch (9) upwards.
Then, press and hold the "ON"
switch (10) to start the motor.
Releasing the "ON" switch will
turn off the machine.
Avoid changing the direction quickly.
Let the motor come to a full stop
before restarting.

Pusher

If small shredded material is not drawn in
correctly, the material can be with the help
of the stopper (14) in the Funnel (8) pressed
down will be. During operation, insert the
tamper (14) between the handle (7) and
the control panel. The tamper (14) is safely
stored in the hopper (8).

Emptying the collector box

Do not leave it until too late to empty
the collector box (17). Remember
that the collector box fills unevenly
under the ejector opening.
1. Switch the shredder off. (see"
F
switching the shredder on and
off")
2. Unlock the collector box (17) by
placing the safety switch (4) in
the OFF position.
3. Remove the collector box (17)
from the chassis (16) and empty
it.
14
4. Make sure that the area around
the safety switch (4) is free of
wood chippings before you
reattach the collector box (17).
5. Reattach the collector box (17 )
and place the safety switch (4) in
the ON position.

Overload protection

In the event of overload, e.g. due to
branches that are too thick, the equipment
automatically switches off.
The overload protection switch (12) is
motivated and the Power-On indicator (13)
turns off which means power off.

Restart prevention

After switching off automatically as a result
of overload, the equipment will not restart
automatically.
After 1 - 2 minutes, to press the Overload
protection switch(12) to repower the
mahcine.
The Power-On indicator (13) turns red
which means power on.

Working methods

General working instructions

Keep enough distance to the
shredder since long branches
can be spun off while being
drawn into the shredder.
Wear ear and eye protection
Wear hand protection