Safety Precautions; Symbols Used In The Instructions; Symbols On The Shredder - Parkside PLH 2800 B2 Originalbetriebsanleitung

GB IE NI
The sound levels have been determined in
accordance with noise measuring process
EN 13683:2009-09, appendix F.
Do not exceed the maximum authorised
network impedance of 0.28 Ohms at the
electrical connection point.
If necessary, confirm with your electricity
supplier regarding adherence to this
requirement.
Noise and vibration values were determined
according to the standards and stipulations
mentioned in the declaration of conformity.
Technical and optical changes can
be carried out in the course of further
development without notice. All dimensions,
references and information of this instruction
manual are therefore without guarantee.
Legal claims, which are made on the basis
of the instruction manual, cannot thus be
considered as valid.

Safety precautions

This shredder may
cause serious injuries if
improperly used. Before
using the shredder, read
the user manual carefully
and familiarise yourself
with all of the controls.
In cases of uncertainty,
ask an expert for advice.
Keep the manual in a
safe place and pass it
on to any subsequent
owner to ensure that
the information
contained therein is
available at all times.
It should be noted
that the user himself
is responsible for
6
accidents or hazards to
other persons or their
possession.
Symbols used in the
instructions
Hazard symbols
with information
on prevention of
personal injury and
property damage.
Precaution symbol
(explanation of
precaution instead
of exclamation mark)
with information on
prevention of harm /
damage.
Notice symbol with
information on how
to handle the device
properly.

Symbols on the shredder

Warning!
Read the manual
Wear hearing protection