Parkside PLH 2800 B2 Originalbetriebsanleitung Seite 12

motor is free of rubbish
and other accumulations
in order to safeguard the
motor from damage or
possible fire. Remember
that the cutting tool is also
activated when the starting
mechanism is started on a
motor operated machine.
• Immediately switch off the
power source and wait
until the machine has
completely stopped, if the
cutting mechanism hits a
foreign object, or if the
machine starts to make
unusual noises or vibrate.
Disconnect the machine
from the mains and take
the following steps before
restarting and operating the
machine:
1) check for damage;
2) replace or repair
damaged parts;
3) check for loose parts
and tighten them.
CAUTION! The following
states how damage to
the device and possible
injury to people can be
avoided:
• Clean the ventilation slits
regularly; keep to the
maintenance instructions.
• Do not overload your
device. Work only within
the indicated range of
performance. Do not
employ any low power
machines for heavy work.
Do not use your device for
purposes for which it has
not been designed.
• Only switch the shredder
off once the funnel feeder
is completely empty since
the shredder may otherwise
clog up and not be able to
start afterwards.
• Do not attempt to repair the
shredder yourself unless
you are qualified to do so.
Any work not specified in
this manual may only be
carried out by our service
centre.
GB IE NI
11