Beurer BC 28 Gebrauchsanweisung Seite 32

Saving, accessing and deleting measured values
The results of every successful measurement are
stored together with the date and time. The old-
est measurement is overwritten in the event of more
than 60 measurements.
• To retrieve the measurement, press the memory
button M.
A flashes on the display.
The average value of all saved
measured values in this user mem-
ory is displayed.
To change the user memory, press and hold the
memory button M for approx. 2 seconds.
• Press the memory button M.
AM flashes on the display.
The average value of the morning
measurements for the last 7 days is
displayed (morning: 5 a.m. – 9 a.m.).
• Press the memory button M.
PM flashes on the display.
The average value of the evening
measurements for the last 7 days is
displayed (evening: 6 p.m. – 8 p.m.).
• When you press the memory but-
ton M again, the last individual
measurement is displayed (in this
example, measurement 03).
• When you press the memory button M again, you
can view your individual measured values.
• To switch the device off again, press the START/
STOP button
You can exit the menu at any time by pressing
the START/STOP button
32
.
.