Cleaning And Maintenance; Main Brush - CONGA Cecotec 3690 Bedienungsanleitung

ENGLISH

7. CLEANING AND MAINTENANCE

MAIN BRUSH

1. Turn the robot around and press the main brush's release button to take the cover out.
2. Take the main brush out and clean the compartment.
3. Clean the main brush with the provided tools and use water and soap if necessary.
4. Place the main brush in its position and fasten the cover's clip.
Note: replace the main brush every 6-12 months to ensure efficient operating (depending on
the frequency and type of use).
SILICONE BRUSH
To clean the silicone brush, follow the instructions on the previous section to remove it from
the robot and wash it with water and soap. Dry it thoroughly before installing it back to ensure
it operates efficiently.
DUST TANK
1. Open the robot's cover and take out the dust tank.
2. Open the dust tank, take the high-efficiency filter
out and empty the dust.
36
7. Tapa del cepillo central
8. Pestaña
9. Cepillo central
10. Compartimento
1
3
2