CONGA Cecotec 3690 Bedienungsanleitung Seite 33

Schedule
WARNING: the robot cannot be scheduled from more than one device at a time. Make sure to
schedule it either from the mobile phone App or from the remote control.
The robot is provided with a schedule function in order to provide a maximum-efficiency
cleaning. The time settings and the cleaning schedules must be carried out from the remote
control. Once the robot has been scheduled, it will automatically carry out the cleaning cycles
every scheduled day.
Note: make sure the robot is activated and that the light indicator is lighted before scheduling
any cleaning or setting time.
1. Current time
1. Long press the "time" button for 3 seconds. The first 2 digits, indicating the
hour, will start blinking.
2. Use the up and down direction buttons and the "power" button to set the
current time. Then, use the left and right buttons to switch from hours to minutes and
repeat the previous step.
3. Press the "time" button again to save the settings.
2. Cleaning scheduling
1. Long press the
hour, will start blinking.
2. Use the up and down direction buttons and the "power" button to set
the schedule time. Then, use the left and right buttons to switch from
hours to minutes and repeat the previous step.
button for 3 seconds. The first 2 digits, indicating the
ENGLISH
33