Sanus VMF220 Bedienungsanleitung Seite 7

1-2
Attach brackets to aTV with an irregular back
1
[10, 11]
[12]
M4
[10]
[12]
(6901-002023 <04>)
2
[10, 11]
[12]
[05]
[14]
Attach Shoulder Washers and spacers to the brackets
1. Push the shoulder washer [12] through the appropriate
openings of the brackets [01].
Snap shoulder washer [12] into the spacer you selected in
2.
step 1-1.
If you require additional space for cables, recesses, or
protrusions, choose one of the configurations below.
In step 1-1, If you selected the:
M4 x 30mm bolt [05] use the M4 washer [14] and spacer [10].
M6 x 40mm [07] use the M6/M8 washer [15] and spacer [11].
M8 x 45mm [09] use the M6/M8 washer [15] and spacer [11].
Confirm that the brackets are level on the back of the TV.
Standard configurations are shown. For special applications,
or if you are uncertain about your hardware selection, contact
Customer Service.
M6/M8
[11]
[12]
[07, 09]
[15]
7