OHAUS Frontier FC5513 Bedienungsanleitung Seite 31

TM
Frontier Centrifuge FC5513
12.4 Table 4: Error messages
Error-No.: Description
1 Imbalance arose
2 Imbalance sensor is defective
4 Imbalance switch has been activated for longer than 5 seconds
8 Transponder in the rotor is defective
14
Leap of speed is too big between two mesaurements
CLOSE lid
15 Standstill monitoring defective
16 Wrong dircention of rotoration of the motor
33 Open lid while motor is running
34 Lid contact defective
38 Lid motor is blocked
40 Communication with frequency converter distrubed during start
41 Communication with frequency converter distrubed during stop
42 Short circuit in the frequency converter
43 Undervoltage frequency converter
44 Overvoltage frequency converter
46 Over temperature motor
47 Over current frequency converter
48 Timeout between control unit and frequency converter
49 Other error frequency converter
55 Overspeed
70 Timeout between controler and RS232 interface
80 Memory Error intern EEPROM
99 Rotor is not allowed in this centrifuge
Inserted rotor does not exist in the programm
FALSE
Rotor is not detected
rotor no
EN-25