Bosch PDA 180 Handbuch Seite 8

Replacing the Sanding Plate
Push the SDS slider 1 to the right as far as possi-
ble ( ) and remove the sanding plate 8.
To attach the sanding plate 8, press on ( ) and lock
with the SDS slider ( ).
If the front point of the sanding sheet is worn
out, for example, the complete sanding plate
can be removed and – rotated by 120° – reat-
tached.
Dust Vacuuming with the
External Extractor Device
Dust extraction prevents large accumula-
tions of dust, high concentrations of dust
in the ambient air and facilitates disposal.
The machine has a built-in vacuuming channel
which, in conjunction with a suitable vacuum
cleaner, provides external dust extraction.
For extraction, a 19 mm dia. vacuum hose 6 can be
connected directly to the vacuum connection 5.
When using a 35-mm dia. vacuum hose, an addi-
tional adapter must be used (1 600 499 005 – see
accessories).
The appliance can be plugged directly into the
socket of a Bosch all-purpose vacuum cleaner which
incorporates a remote-control start device. The vac-
uum cleaner automatically starts when the appliance
is switched on.
For long periods of working with wood or for commer-
cial use on materials that produce dust that is detri-
mental to health, the machine is to be connected to a
suitable external dust extraction device.
Operating Instructions
The abrasive power is determined mainly by the type
of sandpaper used, and in case of using a tool with
integrated electonic control system (PDA 180 E) by
the pre-selected frequency.
For exact sanding in corners, on edges and hard-to-
reach places, sanding can be done with the point
alone or with one of the edges of the sanding sheet.
Only flawless sanding sheets produce good sand-
ing results and protect the machine.
Take care to apply uniform sanding pressure; the
service life of the sanding sheet is increased in
this manner
An increase in the sanding pressure does not in-
crease the sanding performance but causes in-
creased wear to the machine and the sanding tools.
8
Do not sand wood and metal with the same sand-
ing sheet.
Use only original Bosch sanding sheets, pol-
ishing tools and accessories.
Sanding Sheet Usage
Depending on the material to be worked and the de-
sired surface removal, various sanding sheet are
available.
Coated sanding sheets have a much higher service
life as compared with uncoated sheets when used
with the prescribed material.
"White Paint" (sanding sheet "White"):
especially suited for working layers of paint or van-
ish, res. priming like filler.
"Red Wood" (sanding sheet "Red"):
suited for working any wooden materials, available
in 3 different versions.
"Black Stone" (sanding sheet "Black"):
suited for working extremely hard materials, like
stone, marble, granite, ceramic, or glass.
Fleece and Polishing Felt Usage
The usage of fleeces and polishing felts make possi-
ble the finishing or polishing of metal and stone in
particular. Depending on the desired surface quality,
various types of fleeces and polishing felts can be
used.
Sanding Accessories
The attachment and removal of all sanding accesso-
ries are made in the same manner as the replace-
ment of the sanding plate.
Louver Sanding Attachment (Fig. A)
The use of the louver sanding attachment 10 makes
possible the sanding of especially hard-to-reach
places, e. g., louvers on windows, cabinets and
doors.
Sanding Tongue, Flat (Fig. B)
The flat sanding tongue 11 makes possible the
sanding of small slots or narrow spaces, for exam-
ple.
Sanding Tongue, Oval (Fig. C)
The oval sanding tongue 13 is already covered on
both sides with Velcro material. Sanding sheets 12
can therefore be attached to both sides.