Step 6: Assign Settings To Scene; Complete Programming; Custom Layouts; Firmware Update - OSRAM LIGHTDRIVE+ Installationsanleitung

11.7

Step 6: Assign settings to Scene

All Scene LEDs blink and you can save the current effect and settings to a Scene.
Touch the respective Scene button to save the Scene. After a signal sound the
LIGHTDRIVE+ returns to standard mode. Long-press Zone C to abort programming.
A short press of Zone C gets you back to step 5.
12

Complete programming

To use the digital inputs and solid-state relays of the LIGHTDRIVE+ use the LIGHT-
DRIVE+ Configurator running on a Windows® system. With this application you cre-
ate configuration files which are placed on the LIGHTDRIVE+'s USB storage. This
configuration includes all variable parameters as well as assignment of digital inputs
and relay outputs.
Download the LIGHTDRIVE+ Configurator from
www.ecue.com/download
The downloaded package includes the application and a user manual.
13

Custom layouts

The LIGHTDRIVE+ can be customized in various levels with customer-defined prints,
glass color, Jog Wheel color and symbols. For details please visit
www.ecue.com
14

Firmware update

To update the firmware on the LIGHTDRIVE+, download the firmware from e:cue's
website from the download section. Save the firmware file on a local drive of your sys-
tem. Connect the LIGHTDRIVE+ to your system using a standard microUSB cable.
The LIGHTDRIVE+ can be powered over the USB interface, as long as the system is
able to provide up to 500 mA of supply current. The LIGHTDRIVE+ is now visible in
the Windows Explorer.
Setup Manual - LIGHTDRIVE+
21