Fixture Types; Zones; Power Supply - OSRAM LIGHTDRIVE+ Installationsanleitung

Setup Manual - LIGHTDRIVE+
8.1

Fixture types

A B Fixture type
1 0 Monochrome
1 1 Dynamic White
0 0 RGB
0 1 RGBW
8.2

Zones

The LIGHTDRIVE+ can control three different zones, which can be selected from the
front panel.
Zones
A DMX 1, DMX addresses 1 ... 512
B DMX 2, DMX addresses 1 ... 256
C DMX 2, DMX addresses 257 ... 512
9

Power supply

The LIGHTDRIVE+ is powered by a 24 V DC external power supply or via standard
Power over Ethernet (PoE). It is also possible to power the LIGHTDRIVE+ via the USB
interface. This is only recommended when updating the firmware of the device and
no external power supply is available.
The LIGHTDRIVE+ requires up to 500 mA supply current from the
i
USB interface (USB 2.0). Make sure that the power source can
provide this current.
14