Mounting; Unmounting - OSRAM LIGHTDRIVE+ Installationsanleitung

6

Mounting

The LIGHTDRIVE+ can be mounted in most standard wall-mount boxes (DE, US, UK,
JP etc.). It is recommended to install it in a double-box to have room for the cabling.
Place the LIGHTDRIVE+ on the base
plate so all four noses of the base plate
rest in the four holes of the LIGHT-
DRIVE+. Shift down the LIGHTDRIVE+
until the locker latches with a small
click.
Keep the shielding and twisting of the
Ethernet wires as long as possible to
ensure proper Ethernet connections.
6.1

Unmounting

To unmount the LIGHTDRIVE+, insert a narrow screw driver into the small hole in the
bottom right side to unlock the latch. Shift the LIGHTDRIVE+ slightly up until it gets
fully released.
Mount the base plate for the LIGHTDRIVE+ with the
provided screws on the wall-mount boxes, recess
to the top. Use a spirit level to ensure proper posi-
tioning. Use as many of the appropriate fixing holes
of the base plate as possible. Make all required con-
nections to the LIGHTDRIVE+
Setup Manual - LIGHTDRIVE+
11