Adjusting The Settings; Loop Recording; Emergency Video Protection - Z-EDGE Z3D Bedienungsanleitung

No. Item
10/
Record / Stop
13
11 Menu
12 Preview
14 Time Stamp

3.3 Adjusting the Settings

Customize the video recording and other general settings via the on-screen
display (OSD) menus:
If the device is recording, short press the 'OK/REC' button (6) to stop and enter
Standby Mode.
1. Press the 'Esc/Menu' button (3) to enter the General Settings menu.
2. Press the 'Up' and 'Down' buttons (4 & 5) to select a menu option and press
the 'OK/REC' button (6) to enter the selected menu.
3. Press the 'Up' and 'Down' buttons (4 & 5) to select the desired setting and
press the 'OK/REC' button (6) to confirm the setting.
4. From the General Settings menu Press the 'Esc/Menu' button (3) to enter the
Feature Settings menu.
5. Press the 'Up' and 'Down' buttons (4 & 5) to select the desired setting and
press the 'OK/REC' button (6) to confirm the setting.

3.4 Loop Recording

Videos are recorded and saved to the memory card in set intervals. Once the
memory card is full, Loop Recording automatically overwrites the earliest
unprotected saved file. This prevents long duration video clips from being lost
in a single overwrite.Video files can be saved to the memory card in 1, 2 or 3
mins intervals. General Settings > Loop Recording

3.5 Emergency Video Protection

If Vibration Detection is enabled and senses an unusual impact or collision the
dash cam will automatically protect the currently recorded video file from
being overwritten. A
protected.To manually protect a video file during a recording, short press the
'Esc/Menu' button (3).
Description
Indicates if device is recording, press 'OK/REC'
button (6) to start/stop recording.
Press 'Esc/Menu' button (3) to enter menu.
Press 'Down' button (5) to preview video/photo.
Time and date
icon appears top left to signify the current recording is
-11-