Adjusting The Settings; Loop Recording; G-Sensor - Z-EDGE T4 Bedienungsanleitung

G-Sensor

Loop Recording

Parking Mode
Screen Auto Off
Note:
• After selecting a mode, you can still customize any of the four settings
inside the Main Menu or Setup menus.
• Each and every time a new mode is selected, all four settings will change
to their preset values, overwriting any customizations you may have made.

4.4 Adjusting the Settings

If you'd prefer to customize each dash cam setting yourself, you can do so in
the Settings menu:
1. Tap anywhere on the Home Screen to reveal the Shortcuts.
2. Tap on the Main Menu icon (E), and select Settings (K) from the menu.
• Scroll the menus by tapping the '
• Tap on a feature to enter and customize it.
• Make a selection to automatically save and return to the Settings menu.
• From the Settings menu tap '
• Tap ' ' icon to exit and return to the Home Screen.
4.5 Loop Recording
Videos are recorded and saved to the TF/Micro SD card at set intervals. Once
the TF/Micro SD card is full, Loop Recording automatically overwrites the
earliest unprotected saved file. This prevents long duration video clips from
being lost in a single overwrite.
Video files can be saved to the TF/Micro SD card in 1, 3 or 5 min intervals:
Main Menu > Loop Recording
4.6 G-Sensor
The built-in G-Sensor monitors and detects unusual impacts or vibrations. It
automatically triggers the Emergency Video Protection and Parking Mode
features.
Set the sensitivity to automatically trigger these features with smaller or larger
vibrations (feature can also be turned Off): Main Menu > Settings > G-Sensor
Normal
3 mins
On
1 min
' icon to return to the Main Menu.
Low
5 mins
On
Off
' or ' ' icons.
-12-
High
1 min
On
1 min
-
-
-
-