Bosch PLR 50 C Betriebsanleitung Seite 39

OBJ_BUCH-2326-002.book Page 39 Friday, November 7, 2014 10:15 AM
Deleting Measured Values in the Measured-Value List
Press the i button and select the p button.
After selecting the h button, you can delete either the entire meas-
ured-value list or individual measured values. Repeatedly press
the h button briefly to delete the individual measured values in re-
verse order.
Data Transmission to other Devices
The measuring tool is equipped with a Bluetooth® module, which enables data trans-
mission via radio technology to certain mobile terminals/devices with a Bluetooth® in-
terface (e.g., smartphones, tablets).
For information on the necessary system requirements for a Bluetooth® connection,
please refer to the Bosch website at
www.bosch-pt.de.
For data transmission via Bluetooth®, time delays between mobile terminal/device
and measuring tool may occur. This can be possible due to the distance between both
devices or the object being measured.
Activating the ® Interface for Data Transmission to a Mobile Termi-
nal/Device
To activate the Bluetooth® interface, press the Bluetooth® j button on the measuring
tool. Alternatively, the Bluetooth® interface can be activated via the "Basic Settings"
menu (see page 35).
Ensure that the Bluetooth® interface is activated on your mobile terminal/device.
Special Bosch applications (apps) are available to extend the functional range of the
mobile terminal/device and for simplification of the data processing. Depending on
terminal/device, these can be downloaded at the respective app stores:
Bosch Power Tools
English | 39
2 609 141 217 | (7.11.14)