Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Packing list
The following parts are packed separately in the packing box.
When you have unpacked the box, please check the parts that it contains.
Contact your dealer if anything is missing or broken.
Assembly
Read the operator's manual carefully to ensure that you assemble the product correctly.
Using a product that has been incorrectly assembled could lead to an accident or serious injury.
Handle shaft / drive shaft
Handle shaft / power head
Before you start
Power head
Handle shaft assembly
Drive shaft assembly
Cutting attachment with guide bar and saw chain
Operator's manual
Socket wrench
L-wrench
Safety goggles
Shoulder harness
Guide bar cover
WARNING
1.
Remove protective caps from handle shaft assembly.
2.
Loosen clamping bolts (A) on drive shaft.
3.
Pull flexible drive shaft coupler (B) 51 - 76 mm (2 -3 inches)
out of handle shaft.
4.
Align flexible drive shaft coupler with drive shaft socket and
slide together until handle shaft is fully seated into drive
shaft.
5.
Tighten clamping bolts (A).
1.
Loosen two clamping screws (A).
9
Before you start
Werbung
Kapitel
Inhaltsverzeichnis
