Editing Parameters - Samson Graphite MF8 Schnellstartanleitung

Editing Parameters

The Graphite MF8 settings for presets 2-5 can be customized using the Graphite Mini
computer editor, which can be found on the Samson website (www.samsontech.com).
Using the computer editor allows you to modify, upload, and save presets. The following
information outlines the available parameters for each control that can be adjusted.
Channel Faders, Channel Knobs, Crossfader, and Master Encoder:
MIDI Channel: Sets the specific MIDI channel that the control will transmit. Each channel
strip (fader, knob, solo/mute and rec button) is set to a single MIDI channel.
Control Change: Sets the control change number that the control will transmit.
Solo/Mute, Rec, Left (<), Right (>), Function, and Transport Buttons:
MIDI Channel: Sets the MIDI channel number that the button will transmit.
Note or Control Change: Sets the button to transmit a note or control change message.
Note Number or CC#: Sets the specific note number or CC# that the button will transmit.
Type: Sets the button to toggle (sends an on message when first pressed and an off
message when pressed again) or momentary (sends an on message when pressed and off
message when released).
14