Samson Graphite MF8 Schnellstartanleitung Seite 12

Front Panel Controls and Functions
7. PRESET Button - Press this button to choose one of the five available presets.
Presets are recalled by pressing one of the Function buttons. Each preset can have
unique MIDI parameters assigned to the each control, and can be adjusted using
the Graphite Mini computer editor. Preset 1 is assigned to work with computer
software utilizing the Mackie Control protocol and cannot be modified.
8. Left < Button - This buttons can be set to transmit control or note information.
Pressing the button will send the MIDI message and the button will light green. In
Preset 1, this button will shift the controls down eight channels in your DAW.
9. Right > Button - This buttons can be set to transmit control or note information.
Pressing the button will send the MIDI message and the button will light green. In
Preset 1, this button will shift the controls up eight channels in your DAW.
10. Master Encoder - This continuous encoder sends continuous control data.
11. Crossfader - This assignable fader sends continuous control data to your DAW.
12. Function Buttons - The five function buttons can be used to send MIDI note or
control information, and can be set to either toggle or momentary operation. The
buttons are also used to select presets.
13. USB Connector - Connect the included USB-mini cable from this port to the USB
connector on a computer to provide power to the controller, as well as to send and
receive MIDI data.
12