Product Description And Specifications; Product Features; Technical Data - Bosch ANGLE EXACT 2 Originalbetriebsanleitung

Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
ANGLE EXACT 2 | 3 | 6 | 7 | 8 | 15 | 17 | 23 | 30
The power tool is intended for tightening and loosening
screws, bolts, nuts and other threaded connectors in the
specified power and dimension ranges.
The power tool is not intended for drilling; in order to pre-
vent personal injury and damage to property, power tools
with a shut-off clutch should never be used for drilling.
ANGLE EXACT 14CF | 22CF | 29CF
Due to its slow anti-clockwise rotation, the power tool is in-
tended for operation with an open flat drive. It is suitable for
working on screw connections that are only accessible from
one side,e.g. on pipelines.
It is not suitable for loosening screws.
The power tool is not intended for drilling; in order to pre-
vent personal injury and damage to property, power tools
with a shut-off clutch should never be used for drilling.

Product Features

The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Application tool (e. g. nut driver bit)
(2) Tool holder
(3) Angled screw head
(4) Open-ended spanner with width across flats of 27
mm
(5) Spanner flat on angled head flange

Technical data

ANGLE EXACT industrial cordless angle wrench
Article number
Max. torque, hard/soft screwdriving application accord-
ing to ISO 5393
No-load speed n
0
Rated voltage
Direction of rotation
Weight according to EPTA-Procedure 01:2014
Protection rating
Bosch Power Tools
(6) Open-ended spanner with width across flats of 22
mm
(7) Slider for preselecting the torque
(8) Hanging hook
(9) LED indicator for screwdriving applications
(10) Battery charge LED indicator
(11) Battery with contact APT
(12) Battery release button
(13) On/off switch
(14) Rotational direction switch
(15) Attachment slots for hanging hook
(16) LED holder
(17) Marking ring
(18) Worklight
(19) Spanner flat on the cap nut
(20) Lock nut
(21) Charger
(22) Mains plug
(23) Green LED indicator on the charger
(24) Red LED indicator on the charger
(25) Connection socket for a voltage adapter on the 4EX-
ACT
(26) D-Sub connector plug
(27) Screws on the D-Sub connector plug
(28) Voltage adapter
(29) Quick-change chuck
(30) Adjustment tool
(31) Hex key
(32) Setting disc
(33) Spring ring
(34) Cavity in the housing shell
(35) Handle (insulated gripping surface)
Accessories shown or described are not included with the
product as standard. You can find the complete selection of ac-
cessories in our accessories range.
2
0 602 490 647 0 602 490 656
Nm 2/2
-1
min 110
V 9.6
kg 1.0
IP 20
English | 19
3 6
0 602 490 652
3/3 6/6
420 650
9.6 9.6
1.0 1.0
IP 20 IP 20
1 609 92A 4V1 | (05.03.2019)